Replacing A System Processor Module For The 8001-12C Or 8005-12N - IBM CS821 Service Manual

9. Holding the vacuum pen, lift the pen and system processor module from the socket. Place them at
an angle on the top cover of the system processor module packaging as shown in Figure 67. Setting
the system processor module at an angle on the top cover of the system processor module packaging
will make it easier to pick up and place in the packaging after you replace the system processor
module.
Figure 67. Placing the processor at an angle on the top cover of the packaging
10. Press the top of the pen to release the system processor module onto the cover.
Figure 68. Releasing the pen

Replacing a system processor module for the 8001-12C or 8005-12N

Learn how to replace a system processor module in the IBM Power System S821LC (8001-12C) or the IBM
CS821 (8005-12N) system.
58
Power Systems: Servicing the IBM Power System S821LC (8001-12C) or the IBM CS821 (8005-12N)