Table of Contents
Advertisement
Figure 54. Lowering the processor into the socket
b. After the system processor module is properly aligned, press the top of the pen to release it from
the processor. Lift the pen off the processor.
10. Move the processor heat sink to the processor. If either the TIM or the heat sink is damaged, replace
both the TIM and the heat sink. Carefully lower the heat sink over the system processor module,
ensuring that the holes in the heat sink (A) align with the two guide pins (B) on the socket, as
shown in Figure 55.
Figure 55. Installing the heat sink
48
Power Systems: Servicing the IBM Power System S821LC (8001-12C) or the IBM CS821 (8005-12N)
Advertisement
Table of Contents
