Manually Tuning Analogue Signals - Sony KD-32NX100U Operating Instructions Manual

TV menu system

Manually tuning analogue signals

With this feature you can manually add analogue programmes to your TV. Manual tuning also allows you
to select inputs from the scart sockets (VCRs etc) so that they can be viewed on the programme number
of your choice.
To check which mode you are in, press the
programme, an Info display appears on screen providing brief details for the current and next programme.
If this happens, press the DIGITAL/
channels.
1. Press the MENU button to display the main menu.
2. Press the v button to highlight the
3. Press the v button to highlight 'Manual Set Up' then press the b button to display the Manual Set Up
4. Press the v button to highlight 'Manual Programme Preset' then press the b button to display the
OK
5. Press the V or v button to highlight the programme number you require, then press the b button to
6. Press the V or v button to set to OFF, then press the b button to highlight SYS column.
7. Press the V or v button to select your system requirement. For example, choose I for theTV
MENU
8. Press the OK button to store.
9. Repeat steps 5 - 8 if you wish to tune in broadcasts to other programme numbers, then press the
30
menu.
Manual Programme Preset menu.
highlight the SKIP column.
broadcasts or 'EXT' if you wish to view signals from your VCR or other equipment you have connected
to the scart sockets (AV1, AV2 etc.). Press b button to confirm your choice.
If you selected a TV broadcast system:
Press the V or v button to select 'C' for terrestrial channels, 'S' for cable channels or 'F' for direct
frequency input, then press b button to confirm your choice.
If you know the channel number or frequency number you require, use buttons 0 - 9 on the remote
control to enter the number, otherwise press the V or v button to search for the next available
broadcast. If the broadcast found is not the one you desire, press the V or v button to repeat the
search.
If you have selected EXT:
Press the V or v button to select the AV socket whose input you wish to view on the programme
number chosen in step 5.
MENU button to remove the menu from the screen .
button on the remote control. If you are watching a digital
button on the remote control to switch to the traditional analogue
icon, then press the b button to highlight 'Auto Tuning'.