Manually Tuning The Tv - Sony FD Trinitron KV-28DX30U Operating Instructions Manual

Additional TV Features

Manually tuning the TV

You have already tuned the TV automatically using the instructions at the start of this manual. You can however carry out this
operation manually, adding channels to the TV, one at a time.
2 3
1
5 6
4
7 9
8
0
MENU
OK
PROGR
RM-888
1. Press the MENU button on the remote control to display
the menu on the TV screen.
V v
2. Press the or buttons to select the
b
screen then press the
V v
3. Press the or buttons to select 'Manual Programme
Preset' on the menu screen then press the
the 'MANUAL PROGRAMME PRESET' menu.
V v
4. Press the or buttons to select an unused programme
number for your channel then press the
V v
5. Press the or buttons to select the TV broadcast system
(I for analogue or DIG for digital) or a video input source
(AV1, AV2 ...) then press the
6. Select the first number digit of 'CHAN' (channel) then the
second number digit of 'CHAN' with the numbered buttons
on the remote control
or
V v
Press the or buttons to search for the next available
channel.
7. If you wish to change the 'SERV' service number (on
digital programmes only), select each digit in turn and press
the numbered buttons on the remote control to change to
your desired service.
8. If you do not wish to store this channel on the programme
number you selected, press the
remote control to continue searching for the desired
channel.
9. If this is the channel you wish to store, press the OK button.
10. Repeat steps 4-9 if you wish to store more channels then
press the MENU button to remove the menu from the TV
screen.
NOTE: After manually tuning in the channels you require, you
can sort the channels into the order you prefer by following the
procedure 'Re-arranging the TV channels' on page 24.
symbol on the TV
button to enter the PRESET menu.
b
button to enter
b
button to enter.
b
button to confirm.
V v
or buttons on the
03
19