Tv Menu System; Using The Programme Index Table; Adjusting The Picture - Sony KD-32NX100U Operating Instructions Manual

The following pages explain the TV set up menus and their operation. Although most of these menus can be accessed whilst
watching digital programmes, we recommend you switch to analogue mode to view all the menus. To check which mode you are in,
press the button on the remote control. If you are watching a digital programme, an Info display appears on screen providing brief
details for the current and next programme. If this happens, press the DIGITAL/
traditional analogue channels.

Using the programme index table

OK

Adjusting the picture

1. Press the MENU button to display the main menu, then press the b button to highlight 'Picture Mode'.
2. Press the V or v button to highlight the option you require then press the b button to confirm.
3. Press the MENU button when you wish to remove the menu from the screen.
OK
MENU
The programme index table is an easy way to search for a programme you wish to view.
1. Press the OK button to display the programme list on screen.
2. Press the V or v button to scroll through the list until the programme number you wish to view is
highlighted, then press the OK button to display that programme on screen.
The table below explains the function of each option and which buttons to press for adjustment. Once
adjustment has been finalised, press the OK button to store.
Option Adjustment/Effect
Picture Mode Press V or v button to select Live, Personal, Movie or Game mode. Live, Movie and
Game have had their picture levels preset to suit their intended functions, whilst
Personal mode allows you to set your own levels of brightness, sharpness and
colour.
Contrast Press B or b button to increase or decrease the levels to suit personal taste. You can
Brightness only adjust the Colour, Brightness and Sharpness if you have selected 'Personal' in
Colour 'Picture Mode' option.
Sharpness
Reset Resets picture to factory preset levels.
Press V or v button to turn On or Off. When set to On, the TV will monitor the picture
AI (artificial
intelligence) and limit any sudden increases in brightness and contrast.
Noise Press V or v button to switch On or Off. When set to On, this option can sometimes
Detection reduce the noise level apparent on a weak signal.
DRC Press V or v button to set the desired picture resolution. Set to 'Off' for basic picture
Mode quality, 'DRC50' for improved resolution or 'DRC100' for optimum picture resolution.
Colour Tone Press V or v button to alter the tint of the colour to suit your taste. Choose from
Warm, Normal or Cool.

TV menu system

button on the remote control to switch to the
23