Keysight Technologies P50 B Series Quick Start Manual

P50xxB/P937xB/P938xB Series
Keysight Streamline Series VNA,
Thunderbolt 3
Please use ESD Precautions when handling and operating
System Requirements
Description
Operating system
Available memory
Available disk space
Display resolution
Recommended CPU
Connected with VNA
Must install IO Libraries Suite 2021 update or greater.
a.
Installation Procedure
1. Download and install the Keysight IO Libraries Suite
from https://www.keysight.com/find/iosuite. Follow
the installer prompts.
2. Download and install the network analyzer software
from https://www.keysight.com/find/pxiusbvna-
firmware. Follow the installer prompts.
3. Shutdown a PC once the installation is done.
4. Connect the included Thunderbolt 3 cable to either of
port on the Network Analyzer rear panel and the other
end of the cable directly to a Thunderbolt3 (USB-C)
port on the PC.
Requirements
Windows 10 (64 bit only) a
16 GB recommend, 4 GB minimum
2 GB available drive space minimum
1024 x 768 minimum
Intel Core i7 10 th Generation or later
Thunderbolt TM 3
Quick Start Guide
For P502xB-402 or P5025/6/7/8B-400,
connect the control cable and tighten it with
the nuts as shown in the image above.