Full Two-Year Warranty; Frequently Asked Questions - Philips AVENT SCD520H Manual

Question
Why don't both the power-
on light of the baby unit and
the LINK light of the parent
unit come on when I press
the on/off buttons of the
units?
Environment
- Dispose of batteries properly. Do not incinerate. Batteries may
explode if overheated. Do not wrap in metal or aluminum foil. Wrap in
newspaper before discarding.
- It is suggested that you contact your local town or city to determine
proper battery redemption site(s) in your area.
Warranty

FUll TWO-YEAR WARRAnTY

Philips Electronics North America Corporation (USA) and Philips
Electronics Ltd (CANADA) warrant each new Philips AVENT product,
model SCD510/00, against defects in materials or workmanship for a
period of two years from the date of purchase, and agrees to repair or
replace any defective product without charge. IMPORTANT: This warranty
does not cover damage resulting from accident, misuse or abuse, lack
of reasonable care, or the affixing of any attachment not provided with
the product. NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES. In order to obtain
warranty service, simply call toll-free 1-800-54-AVENT.

Frequently asked questions

This chapter lists the questions most frequently asked about the appliance.
If you cannot find the answer to your question, call 1-800-54-AVENT (1-
800-542-8368) for assistance.
Answer
Perhaps the rechargeable battery pack of the parent unit is empty and
the parent unit is not connected to an electrical outlet. Insert the small
appliance plug into the parent unit and put the adapter in a wall socket.
Then press the on/off button to establish connection with the baby unit.
Perhaps the non-rechargeable batteries of the baby unit are empty and
the baby unit is not connected to an electrical outlet. Replace the non-
rechargeable batteries or connect the baby unit to an electrical outlet.
Then press the on/off button to establish connection with the parent
unit.
The baby unit and the parent unit may be out of range of each other.
Move the parent unit closer to the baby unit, but not closer than 3
feet/1 meter.
If the LINK light on the parent unit still does not start to flash, use the
reset function to reset the units to their default settings.
EngliSh
1