Assembly; Attaching Handle To The Vacuum Cleaner - Panasonic MC-UG413 Operating Instructions Manual

WARNING
Electrical Shock Hazard
Do not plug into the electrical supply until the assembly is complete. Failure to do so
could result in electrical shock or injury.
Attaching the Handle to the Vacuum Cleaner
Handle screw
Vis du manche
Tornillo del mango

ASSEMBLY

Handle
Manche
Mango
­ Set the vacuum cleaner to the upright
position.
­ The handle screw has been installed
for shipping purposes.
­ Remove the screw before inserting
handle.
­ Insert the handle as shown in the
illustration.
­ Insert the screw that you removed. Be
sure screw is not over tightened.
CAUTION
Do not overtighten.
Overtightening could strip the screw
holes.
Do not operate the vacuum cleaner
without the screw in place.
- 12 -