Table of Contents
Advertisement
IDENTIFICATION OF MAIN PARTS
A-1) Handle
G) Dust bag check indicator
C) ON/OFF Switch
Dust bag cover
Clean air filter/HEPA Filter
Cleaning head
Furniture guard
D) Foot pedal
(Handle release)
HOW TO ASSEMBLE YOUR CLEANER
A) HANDLE ASSEMBLY / HOSE ASSEMBLY / MAINS LEAD STORAGE
1) Insert the base of the
handle into the top of the
body of the machine as
shown. Push in handle and
tighten the screw.
IMPORTANT:
Do not overtighten the
screw.
4
Paper dust bag
Extension wand
Hook
(both side)
Hole
2) Insert the hose to suction
inlet.
Ensure that the 2 hooks of
the hose are completely
fitted into the 2 holes of
the suction inlet.
Crevice nozzle
Hose clip
3) Set the hose around the
hose clip.
NOTE: Always place the
hose in the
clockwise
direction.
B-2) Cord clip
A-4) Upper cord hook
B-1) Mains lead
A-3) Hose clip
A-4) Lower cord
hook/Carrying
handle
Dusting brush
Hose
Upper cord hook
Lower cord
hook/Carrying
handle
4) Turn the upper cord hook in the
upright position and wind the
mains lead around the upper and
lower cord hooks.
Advertisement
Table of Contents
