J.P. SELECTA PRO-NITRO A Instruction Manual page 50

INSTRUCTION MANUAL
J
.P. SELECTA s.a.u.
CODE 80189 REV E
The software panels:
The batch panel:
Entry the batch general data on this panel:
Lab. Name: Entry the laboratory name that will appear on the report.
•
• Set operator name: Entry the batch operator name.
Protein factor: Entry the protein factor according to sample type.
•
• Sample size: Entry the quantity of samples that the batch has.
Sample: Choose, using the << and >> keys, the sample and entry the weight
•
(It can be modified).
• Weight: Entry sample's weight.
Once all samples' weights are entered, press "OK" to return to the main panel.
The main panel: (batch analysis)
• General data: (upper left corner) General batch data.
Sample results: (left side) Results of last sample analysed:
•
• Sample Nr: Number of sample in the batch.
Analysis: Analysis number.
•
• Normality: Number of sample in the batch.
Sample weight (mg): Sample weight.
•
Reagent (ml): Reagent volume consumption on the titration.
•
• Nitrogen (mg): Detected nitrogen.
Protein (%): Sample protein contents in %.
•
Batch results: (upper right table) this table summarizes the batch samples
•
results.
• Global batch results: (down right corner) results of the batch:
Protein % average: Batch average protein contents.
•
• RSD (%): Relative standard deviation (over average)
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
12/2020 Page: 50
Tel 34 937 700 877 Fax 34 937 702 362