Scanner Outline
LED
Indicator
Scan
Window
Power Button/
Scan Trigger
Description
Scan Window
Emits a red beam for barcode reading
LED Indicator
Indicates the scanning status
Press and hold for 3 second until a long beep is
Power Button/Scan Trigger
heard to turn power on or press to scan barcodes
Hand Strap Hole
Used to attach hand straps
Battery Compartment
Batteries are stored here
Micro USB slot
Used for communication and charging
Package Contents
Items contain in the package may vary depending on the model of the scanner.
Wireless scanner with battery /
Scanner cradle (optional)
Li-ion battery pack
Communication cable for cradle
(optional)
Mini USB B to mini USB A cable
5V USB Power adapter
Cable clip
*Note: Actual product appearance may vary from the images on this page.
Hand Strap
Hole
Micro USB
slot
Battery
Compartment
Function
(without cradle)
(with cradle)
Z-3392BT
Gun Type Wireless 2D Image Handheld Scanner
Charging the Device
Installing Battery
1.
Unscrew the cap from the battery compartment at the
bottom of the scanner and insert the battery.
2.
Make sure the red tag on the battery is tugged in
and not blocking the cable connector and close the cap.
3.
Tighten the screw on the cap to secure the battery.
Connect the Cradle
Connect the Device with Cradle or USB cable
Approx. charging time: 4.5~6 hours
Communication cable
Mini USB B to USB power adaptor
only
or
Need help?
Do you have a question about the Z-3392BT and is the answer not in the manual?
Questions and answers