Related Manuals for Zebex Z-3051HS
Summary of Contents for Zebex Z-3051HS
- Page 1 Z-3051HS / Z3151HS Handheld High-Speed Laser Scanner Service Guide Revision History Changes to the original manual are listed below: Version Date Description of Version Aug. 19, 2010 Initial release...
-
Page 2: Preface
Optical: The use of optical instruments with this product will increase the eye hazard. Optical instruments include binoculars, magnifying glasses, and microscopes but do not include normal eye glasses worn by the user. Z-3051HS / Z-3151HS Service Guide 2 / 13... -
Page 3: Radio Notice
This scanner is in conformity with CE standards. Please note that an approved, CE-marked power supply unit should be used in order to maintain CE conformance. This manual is in A4 format. Please check your printer setting before printing it out. Z-3051HS / Z-3151HS Service Guide 3 / 13... -
Page 4: Table Of Contents
Table of Contents................................4 Introduction ...................................5 Product Overview ..............................5 Scanner Parts ................................6 Take Apart ..................................8 Before You Start ..............................8 Important Instructions ...........................8 Tools to Prepare ..............................8 Removing the Top Case............................8 Removing Bottom Case............................10 Z-3051HS / Z-3151HS Service Guide 4 / 13... -
Page 5: Introduction
This guide provides step by step instructions on how to take your Z-3051HS apart. Read each step carefully and follow the steps in sequence. Do not skip ahead. -
Page 6: Scanner Parts
Exit Window Read barcodes Buzzer Sound Hole For beep tone indication Trigger Trigger to make data capture Pin Hole Use to remove the cable Scanner Parts The scanner includes the following parts: Z-3051HS / Z-3151HS Service Guide 6 / 13... - Page 7 Self-tapping screw M1.6- 521-202000-4R0 4.0mm flat, Philips head 560-030500-673 Bottom case (White) 560-030500-674 Borrom case (Black) 560-130510-691 Trigger (Z-3051HS) 560-131510-695 Trigger (Z-3151HS) Anti-shock rubber 602-630500-211 (11.5*6.0*2.0) Anti-shock rubber 602-630500-221 (18*6.0*2.0) 603-030500-121 Trigger rubber seal Z-3051HS / Z-3151HS Service Guide 7 / 13...
-
Page 8: Take Apart
Heed all warnings. Tools to Prepare • Philips screwdriver. Removing the Top Case Remove the front cover from the scanner. Next, remove the screws as pointed in red arrows using a screwdriver. Z-3051HS / Z-3151HS Service Guide 8 / 13... -
Page 9: Dust Cover
Separate the top and the bottom cases and remove the dust cover. Remove the FCC cable that binds the top and the bottom cases from the connector as circled in red. The top case is now separated from the bottom case. Z-3051HS / Z-3151HS Service Guide 9 / 13... -
Page 10: Removing Bottom Case
Finally, remove the LED board from the top case. Removing Bottom Case Follow these steps to remove the bottom case after you have removed the top case. Remove the FCC cable from the main board as circled in red. Z-3051HS / Z-3151HS Service Guide 10 / 13... - Page 11 UIDE Take out the engine from the bottom case. Remove the cable connecting the main board and the Buzzer board. Unscrew the screws on the buzzer board as pointed in red arrows. Z-3051HS / Z-3151HS Service Guide 11 / 13...
- Page 12 With screws removed, take out the buzzer board. Take out the power board from the bottom case. To remove the main board, unscrew the screws using a screwdriver as pointed in red arrows. Z-3051HS / Z-3151HS Service Guide 12 / 13...
- Page 13 ERVICE UIDE Finally, with screws removed, take out the main board from the bottom case. Z-3051HS / Z-3151HS Service Guide 13 / 13...