Page 1
Z-3100 Middle-Range Handheld CCD Scanner Service Guide Revision History Changes to the original manual are listed below: Version Date Description of Version Aug. 19, 2010 Initial release Dec. 16, 2010 Corrected P/N for top and bottom case, white FCC cable, and scan engine.
This scanner is in conformity with CE standards. Please note that an approved, CE-marked power supply unit should be used in order to maintain CE conformance. This manual is in A4 format. Please check your printer setting before printing it out. Z-3100 Service Guide 2 / 8...
Table of Contents Preface..................................2 Important Notice ..................................2 Radio Notice...................................2 Radio and Television Interference............................2 For CE-Countries ...................................2 Table of Contents................................3 Scanner Parts ..................................4 Take Apart ..................................6 Before You Start ..............................6 Important Instructions ..............................6 Tools to Prepare ..................................6 Z-3100 Service Guide 3 / 8...
031-006010-520 White FFC cable (031-006010-600) 613-000004-202 Main board 521-202000-4R0 Self-tapping screw M1.6-4.0mm, flat,Philips head Self-tapping screw,M2-8.0mm, round, Philips 521-003000-8R0 head 560-030001-874 Bottom case (Black) 560-030001-873 Bottom case (White) 606-030000-041 Buzzer 640-031000-001 Double sided tape Z-3100 Service Guide 4 / 8...
Page 5
In addition, please only use the screws designed for the cases as listed to avoid any damage to the cases. The rest of the parts , however, are compatible with each other. Z-3100 Service Guide 5 / 8...
Heed all warnings. Tools to Prepare • Philips screwdriver. Please follow these steps to take apart Z-3100. Remove the front cover of the scanner. Remove the screws as pointed in red arrows using a screwdriver. Z-3100 Service Guide 6 / 8...
Page 7
ERVICE UIDE Remove the top case and the dust cover. Remove the screws from trigger. Remove the trigger and the top case. Z-3100 Service Guide 7 / 8...
Page 8
ERVICE UIDE Remove the white FFC cable from the bottom case as marked in red Remove the screws as marked in red. Separate the boards from the bottom case. Z-3100 Service Guide 8 / 8...
Need help?
Do you have a question about the Z-3100 and is the answer not in the manual?
Questions and answers