Error Codes Table - HYOSUNG NH 2700 Manual

NH 2100T
E. ERROR CODE TABLE
ERROR CODES
00000 Normal Status
20001 Cash cassette is not properly set.
20002 Cash cassette empty.
20003 Reject Bin full.
20004 Security Door open.
20010 Receipt paper jam.
Receipt Printer feed lever open.
20012
20013 Receipt paper empty.
20014 Receipt Printer thermal head over heated.
Note detected.
20015
Receipt Printer feed lever open.
Axxx1 Receipt Printer thermal head over heated.
Receipt paper jam.
Axxx2
Receipt paper empty.
Axxx3 Receipt paper setting error.
Axxx4 Receipt Printer DIP switch error.
Axxx5 Receipt Printer Lever Opened
Axxx6
Axxx7 Receipt Printer cutter error.
Receipt Printer connection failure.
Axxx8
ADNxx
CDU sensor blocked.
C0001 ~ C002F CDU main motor failure.
CDU gate solenoid echo error.
C0030 CDU outlet solenoid echo error.
C0031 CDU encoder error.
CDU double detect module failure 1
C0032
C0033 CDU double detect module failure 2
C0034 Note detected (outlet sensor)
C0035 CDU double detect module failure 3
C0036
C0037
ERROR DESCRIPTION
6 - 10
CORRECTIVE ACTION
Normal Status
Set the cash cassette properly.
Load the cash into the cash cassette
and set the number of bills.
Empty the Reject Bin.
Close the Security Door.
Clear the jammed paper.
Close the feed lever.
Load the receipt paper.
Call your service personnel.
Clear jammed notes or
call your service personnel.
Close the feed lever.
Call your service personnel.
Clear the jammed paper.
Load the receipt paper.
Clear the paper and reload.
Call your service personnel.
Check sensor, cable connection and
connector
Check paper jam, or
call your service personnel.
If error is not recovered,
call your service personnel.
Clear the note path or
call your service personnel.
Call your service personnel.
Call your service personnel.
Call your service personnel.
Call your service personnel.
Call your service personnel.
Call your service personnel.
Clear the note from the outlet sensor.
Call your service personnel.
6. Appendix