Related Manuals for Ballard Designs JC334
Summary of Contents for Ballard Designs JC334
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Ceylon Porch Swing ITEM NUMBER: JC334 ASSEMBLED DIMENSIONS : 28.7”H x 65”W X 37”D PRODUCTS ARE NOT INTENDED FOR COMMERCIAL USE. MADE IN VIETNAM UPDATED: 8/15/2019 Page 1 of 6...
-
Page 2: Required Tools
Ltr. Qty. Hardware Included Short Eye Bolt REQUIRED TOOLS: -Screwdriver Long Eye Bolt -Wrench (included) -Allen Wrench (included) Washer -Assembly requires 2 people. -Installation requires a licensed contractor* 110mm Screw 25mm Screw Remove all parts, hardware and L - Bracket protective packaging from carton and carefully arrange 70mm Screw... - Page 3 STEP 1: Insert a Short Eye Bolt (A) into Left Arm (O) and Right Arm (P) as shown below. Add Washer (C) followed by two Nuts (D). Use Wrench (M) to fully and firmly tighten. NOTE: Two nuts are required to prevent Eye Bolt from coming loose over time. (D) (C) STEP 2: Attach Long Eye Bolt (B) to Back (Q) as shown below.
- Page 4 STEP 3: Gently fit dowel on end of Seat (R) into hole on Left Arm (O) and Right Arm (P). Position L-Bracket (G) as illustrated then insert 110mm Screw (E) from side into Seat. Add 25mm Screw (F) to bottom and tighten both using Allen Wrench (N). Finally, fully secure Seat to both arm by inserting 70mm Screws (H) through Seat and into Arms as illustrated.
- Page 5 STEP 5: Insert Wood Plugs (K) into all screw holes on back of Swing. STEP 6: Swing can support up to 800 lbs. *To prevent personal or property damage, all swings should be installed by a Licensed Building Contractor. Hanging hardware is not included as it needs to be determined on site.
-
Page 6: Cleaning And Care
STEP 7: Place Seat Cushion (S) onto Swing Cleaning and Care Please refer to care instructions on product hang tag. Customer Service: 800-367-2810 Page 6 of 6 Online: www.ballarddesigns.com...