Refer to
https://support.lenovo.com/partslookup
replacement parts:
Hinge rubbers
Remove the LCD module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD unit" on page 45
"Remove the strip cover" on page 47
"Remove the hinge rubbers" on page 48
Step 1.
Pull the two tapes (located on left and right edges under the LCD panel) downwards steadily with
the bottom edge as an axis.
Step 2.
Remove three screws. Then, remove the LCD module.
Figure 35. Remove three screws and the LCD module
Screw specifications
M2 x L3
Refer to
https://support.lenovo.com/partslookup
replacement part:
LCD module
Remove the hinges
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD unit" on page 45
"Remove the strip cover" on page 47
"Remove the hinge rubbers" on page 48
"Remove the LCD module" on page 49
to look up the Lenovo part numbers of the following
Number of screws
3
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
49