Figure 30. Remove the USB board
Screw specifications
M1.6 x L2
Go to
https://support.lenovo.com/partslookup
replacement part:
USB board
Remove the hall sensor board and cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the 71Wh battery pack and battery frame (for selected models)" on page 29
"Remove the 99.99 Wh battery pack (for selected models)" on page 31
"Remove the solid-state drive" on page 37
Step 1.
Disconnect and remove the hall sensor board cable.
Number of screws
1
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
47