Adjusting The Flash Output - Canon PowerShot 3632B001 User Manual

Adjusting the Flash Output

In D mode, you can choose 3 levels of flash output.
You can also set the flash output by pressing the n button,
•
choosing [Flash Control] from the 4 tab, and then pressing the m
button. Choose [Flash Output] and use the qr buttons to make the
setting. Alternatively, you can press the r button, then the n
button. Or, you can press and hold the r button.
In M and B modes, you can set the flash output if you choose the 4
•
tab, then [Flash Control] and set the [Flash Mode] option to [Manual].
106
Set the camera to D mode.
Choose the flash output.
After pressing the m button, press the
●
op buttons to choose ~.
Make the setting.
Press the qr buttons or turn the  dial
●
to choose the flash output, then press the
m button.