Changing The Af Frame Position And Size - Canon PowerShot 3632B001 User Manual

FlexiZone/Center
A single AF frame will be used. This is effective for focusing on a specific
point.
In [FlexiZone], you can change the position and size of the AF frame.
In [Center], the frame will appear in the center.
If the camera cannot focus when you press the shutter button halfway the
AF frame will turn yellow, and

Changing the AF Frame Position and Size

When the AF frame mode is set to [FlexiZone] (p. 89) you can change the
position and size of the AF frame.
Changing the AF Frame Position and Size
will appear.
Press the
The AF frame will turn orange.
Move the AF frame.
Turn the  dial to move the AF frame.
●
Press the opqr buttons to make fine
●
adjustments.
●
When faces are detected, each press of
the n button will move the AF frame
to another face.
●
If you keep the
frame will return to the original position
(center).
Change the AF frame size.
Press the l button.
●
The AF frame will become small.
Pressing the l button again will
●
restore the AF frame to normal size.
button.
button pressed, the AF
89