Choosing the Person to Focus On
(Face Select)
You can choose a specific person's face to focus on and then shoot.
Frame
Confirming the number of detected faces
Pressing the l button will display the number of faces detected by the
camera (35 at the most) (orange: main subject's face, white: detected face).
Pressing the op buttons in Step 3, and choosing
the
button in Step 4, will cancel Face Select mode.
92
Set the camera to [Face AiAF]
(p. 88).
Set Face Select mode.
●
Point the camera toward the face of the
subject and press the
After [Face Select : On] displays, an
orange face frame
the face detected as the main subject.
●
Even if the subject moves, the face frame
will follow the subject within a certain
range.
●
If a face is not detected,
appear.
Choose the face on which to focus.
If you press the qr buttons or turn the
●
 dial, the face frame
another face detected by the camera.
If you press the m button or the
●
button, the frame around the chosen face
will turn white.
Shoot.
●
Press the shutter button halfway. The face
frame of the chosen face will change into
a green
.
●
Press the shutter button fully to shoot.
button.
will appear around
will not
will move to
, or holding down