Changing Shooting Functions - Canon PowerShot 3632B001 User Manual

Changing Shooting Functions

If you set the mode dial to G, you can change the settings in the 4 tab
(p. 49).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 180 – 183).
Switching the Focus Setting
The camera focuses on whatever it is aimed at even when the shutter button
is not pressed. However, you can set it so that the camera only focuses
when the shutter button is pressed halfway.
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
152
Choose [Continuous AF], then press the qr
●
buttons to choose [Off].
The camera focuses continuously until
you press the shutter button halfway,
On
allowing you to shoot without missing
opportunities.
Off This conserves battery power.
Choose [AF-assist Beam], then press the qr
●
buttons to choose [Off].