Adjusting the Flash Exposure
Compensation
Just like with exposure compensation (p. 73), you can adjust the exposure
±2 stops in 1/3-stop increments when using the flash.
You can also set the flash exposure compensation by pressing the n
button, choosing [Flash Control] from the 4 tab, and then pressing the
m button. Choose [Flash Exp. Comp] and use the qr buttons to make
the setting. Alternatively, you can press the r button, then the n
button. Or, you can press and hold the r button.
Safety FE
The camera automatically changes the shutter speed or aperture value when the
flash fires to avoid overexposing and blowing out the highlights in the scene. In
the 4 tab, if [Safety FE] in [Flash Control] is set to [Off], the shutter speed and
aperture value will not automatically adjust.
Choose ~.
After pressing the m button, press the
●
op buttons to choose ~.
Make the setting.
Press the qr buttons or turn the  dial
●
to choose the flash exposure
compensation, then press the m button.
~ will appear on the screen.
105