Advertisement
Available languages
Available languages
Mounting
• Install decorative air conduits above the
exhaust hood.
Lower its upper part and fasten it with 2
screws 2.9 x 6.5 mm to the support
bracket of air channels.
•
Fasten 4 screws for ladle holder
support.
•
Install holders ladles holders and fix
them with 2 locking nails.
•
Demount grease filters.
• Mount grease filters.
Attention! In case of ducted application
of the exhaust hood please remove the
charcoal filter, if available (see the
appropriate section).
In case of the ductless application of the
exhaust hood please check if the charcoal
filter is installed, if it is absent - purchase and
install it.
16
14
14
Advertisement
