Advertisement
Available languages
Available languages
Mounting
• Remove the exhaust hood from the wall (9).
• Make 4 perforations (Ш8 mm) and
insert 4 expansion bolts (10).
• Again mount the exhaust hood on the wall (11).
• Make the final fixing with 4 screws 5 x
45 mm (12).
• Connect it to the power source, but
do not turn on the exhaust hood
on the electric cabinet of the house.
• Only for ducted application:
Lead the ventilation duct (13A
- pipe and collars are not included in the
delivery set, they shall be purchased
additionally) to the collar, located above
the module of the draw in engine.
Attach the other pipe flange to the duct
system if the exhaust hood is applied in
the duct mode.
• Only for installation with air
conducts:
If you want to use the exhaust hood in
air recirculation mode, fix deflector F on
the support G and lead the other pipe
flange to the union collar located on the
deflector (13F).
9
9
10
10
11
11
12
12
13A
13F
G
F
15
Advertisement
