Changing Shooting Function Settings - Canon POWERSHOT 300HS User Manual

Changing Shooting Function Settings

If you set the mode switch to 4 and the mode to G, you can change the
settings in the 4 tab (p. 47).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 164 – 167).
Turning Off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
Turning Off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off the
lamp.
148
∆
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
∆
Choose [Flash Settings], then press the
m button.
∆ Press the op buttons or turn the – dial
to choose [Red-Eye Lamp], then press the
qr buttons to choose [Off].