Changing The Lens Retract Time - Canon POWERSHOT 300HS User Manual

Changing the Lens Retract Time

For safety reasons, the lens retracts about 1 minute after pressing the 1
button when in a Shooting mode (p. 27). If you want the lens to retract
immediately when you press the 1 button, set the retract time to [0 sec.].
Turning Off the Power Saving Function
You can set the power saving function (p. 52) to [Off]. Setting it to [On] is
recommended to save battery power.
∆ Choose [Lens Retract], then press the qr
buttons to choose [0 sec.].
∆ Choose [Power Saving], then press the m
button.
∆ Press the op buttons or turn the – dial
to choose [Auto Power Down], then press
the qr buttons to choose [Off].
∆
If you set the power saving function to [Off],
be sure to turn the camera off after use.
Changing Camera Settings
145