Canon POWERSHOT 300HS User Manual page 151

Changing the IS-Mode Settings
• If camera shake is too strong, attach the camera to a tripod. You should
set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
Changing Shooting Function Settings
∆ Choose [IS Mode], then press the qr
buttons to choose an option.
Image stabilization is always on.
You can confirm the result directly
Continuous on the display, which makes it
easier to check the composition or
focus.
Image stabilization is only active at
Shoot Only
the moment of shooting.
Image stabilization only counters
up and down motion. This option is
Panning
recommended for shooting objects
moving horizontally.
151