Using The Face Self-Timer - Canon POWERSHOT 300HS User Manual

Changing the number of shots
In the screen that appears in Step 1, press the op buttons to change the number
of shots and press the n button to make the setting.
• Shutting both eyes will also be detected as a wink.
• If a wink is not detected, the shutter will release approximately 15
seconds later.
• If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.

Using the Face Self-Timer

To take a photo that includes the photographer, such as a group photo,
compose the shot and press the shutter button. The camera will shoot three
times approximately two seconds after you enter the shot and it detects your
face (p. 84).
Choose .
∆
Follow Steps 1 – 2 on p. 54 to choose
then press the n button for more than
one second.
∆ Press the qr buttons or turn the – dial to
, then press the n button.
choose
Compose the shot and press the
shutter button halfway.
∆
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Using the Face Self-Timer
,
61