Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically
also works when [Auto Power Down] is set to [Off].
Changing Shooting Function Settings
After pressing the
the settings in the 4 tab
Before attempting to shoot using a function explained in this section in
modes other than G, check if the function is available in those modes
(pp. 130
Turning Off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
Downloaded From camera-usermanual.com Canon Manuals
button, press the qr buttons to choose G, then change
(p.
41).
– 135).
Changing Shooting Function Settings
Choose [Power Saving], then press the m
button.
Press the op buttons to choose [Display
Off], then use the qr buttons to choose a
time.
In order to save battery power, you should
choose less than [1 min.].
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
(p.
45). This
113