Save The Edited Movie - Canon POWERSHOT 300HS User Manual

Editing
• When [Overwrite] is chosen in Step 4, the unedited movie is overwritten
with the edited movie, erasing the original.
• When there is not enough space left on the memory card, only
[Overwrite] can be chosen.
• If the battery is depleted partway through editing, the edited movie clips
may not be saved. When editing movies, you should use a fully charged
battery or the separately sold AC adapter kit (p. 154).
106
Even if you move
point, only the portion from the nearest
to the left will be trimmed when
chosen. Only the portion from the nearest
to the right will be trimmed when
chosen.
The section indicated with
section of the movie that remains after
editing.
Check the edited movie.
∆ Press the op buttons to choose
(Play), then press the m button. The
edited movie will play.
∆
To edit the movie again, repeat Step 2.
∆ To cancel editing, press the op buttons,
and choose
button, press the qr buttons or turn the
– dial to choose [OK], and press the m
button again.

Save the edited movie.

∆ Press the op buttons to choose
press the m button.
∆ Press the opqr buttons or turn the –
dial to choose [New File], then press the
m button.
The movie will be saved as a new file.
to a point other than a
will be the
. After pressing the m
is
is
, then