Canon POWERSHOT 300HS User Manual page 143

Changing the Start-up Screen
You can change the start-up image that appears on the screen when you turn
on the camera.
Setting a Recorded Image as the Start-up Screen Image
When you press the 1 button and set the camera to Playback mode, you can
register sounds and images.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
Using the included software to register sounds and the start-up screen image
You can register sounds and start-up screen images that come with the included
software to the camera. Refer to the Software Guide for details.
∆
Choose [Start-up Image], then press the
m button.
∆ Press the qr buttons or turn the – dial to
choose an option.
No start-up image.
Preset images. (cannot be modified)
1
Preset images.
2 You can set recorded images, and use the
included software to change the images.
∆
Choose [Start-up Image], then press the
m button.
∆ Press the qr buttons to choose [2], then
press the m button.
∆ Press the qr buttons or turn the – dial to
choose the image and press the m button.
∆ Press the qr buttons or turn the – dial to
choose [OK], then press the m button to
complete registration.
Changing Camera Settings
143