Panasonic SDR-S100 Operating Instructions Manual page 69

7
PictBridge
DATE PRINT
PAPER SIZE
PAGE LAYOUT
PRINT
SETUP ENTER
8
PictBridge
DATE PRINT
PAPER SIZE
PAGE LAYOUT
PRINT
SETUP ENTER
When you stop printing halfway
Press the cursor button down.
≥ A confirmation message appears. If [YES] is selected, the settings are cancelled and
the screen returns to the thumbnails. If [NO] is selected, the settings made in steps 5
to 7 are kept and the screen returns to the thumbnails.
≥ Avoid the following operations during
printing. These operations disable proper
printing.
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power
Use the cursor button to select
[
cursor button right to enter the layout
STANDARD
setting.
≥ You cannot set page layouts not supported on
Use the cursor button to select
[
button right to select [YES]. The
pictures are printed.
YES
NO
≥ Exit PictBridge by disconnecting the USB
PAGE LAYOUT], then press the
– STANDARD: Layout specific to the printer
– : No frame print
– : Frame print
the printer.
PRINT], then press the cursor
cable (supplied) after the pictures have been
printed.
≥ Check the settings for the paper size,
quality of print, etc. on the printer.
≥ You cannot print pictures that cannot be
played on this unit.
≥ When the unit is connected directly to the
printer, the DPOF settings cannot be
used.
69
VQT0T50