Lcd Ai - Panasonic SDR-S100 Operating Instructions Manual

Adjusting LCD monitor (continued)
Changing the picture quality on the LCD monitor
SETUP
POWER SAVE
BEEP SOUND

LCD AI

LCD SET
INITIAL SET
SETUP
≥ When [DYNAMIC] is set, the LCD
monitor is set to the
brightness optimally suited for the
particular scenes to be recorded. Crisp
and bright images will be displayed.
≥ The effect will vary depending on the
scene recorded.
In order to increase the brightness of the entire LCD monitor
≥ When the button is pressed again,
to the LCD monitor.
≥ This will not affect the images to be recorded.
≥ When the AC adaptor is used, [
brighter when the power is turned on.
30
VQT0T50
2/3
NORMAL
DYNAMIC
ENTER EXIT
MENU
color level
and
POWER LCD
Press the menu button, then use the
cursor button to select
[ SETUP]#[
[DYNAMIC] or [NORMAL]. (P26)
[DYNAMIC]
–
The image on the LCD monitor becomes
clear and vivid.
– [NORMAL]:
Switches to the standard picture quality.
≥ This function is automatically set to
[DYNAMIC] when the brightness of the
LCD monitor is increased (when [
displayed) and cannot be set to
[NORMAL] independently.
≥ This will not affect the images to be
recorded.
Press the [POWER LCD] button.
[
] appears on the LCD monitor.
≥ If the [POWER LCD] button is pressed, the
entire LCD monitor will become approx. twice
as bright as the normal.
≥ LCD stands for Liquid Crystal Display, and in
this context refers to the LCD monitor.
[
] goes off, and the original brightness is restored
] appears automatically and the monitor becomes
(LCD AI)
LCD AI]#
:
] is