Motion Picture Playback (Mpeg2 Motion Pictures); Cursor Button - Panasonic SDR-S100 Operating Instructions Manual

Playback
Motion picture playback
1
2
SETUP PLAY
≥If you press and hold the cursor button up or down, you can advance 12 scenes at a
time. The screen will not change at this time, but the scene numbers and bar graph
display will change so release the button when you have arrived at the page with the
scene you want to playback.
3
3:42 PM 3:42 PM
DEC 15 2005 DEC 15 2005
1
4
≥When the : or 9 button is pressed briefly, you can review or cue to the
beginning of scenes (skip playback).
≥No sound will be heard during review playback or cue playback.
≥ When the amount of time recorded on the scene is short, playback may not be possible.
Rotate the mode dial to select
The lens cover closes automatically.
The motion pictures (up to 12 scenes) recorded
on the SD card are displayed as thumbnails.
Press the cursor button up, down, left
1
or right to select the scene to be
3/24 3/24
played back.
1 Scene number
2 Bar graph display
The selected scene will be encircled by a red
frame.
≥ When 13 or more scenes have been recorded,
2
Press the button in the center of the

cursor button.

The selected scene is played back on the full
screen.
The operation icon is automatically displayed on
the LCD monitor.
1 The date/time display reflects the recording
Press the cursor button up, down, left
or right to operate.
Playback/Pause:
Review playback: Continue to press :
Cue playback:
Stop the playback, and show the thumbnails:
(MPEG2 motion pictures)
the next (or previous) page is displayed by
pressing the cursor button.
start date and time so it will remain
unchanged during recording.
Press
Continue to press 9
Press
.
.
.
.
■ .
57
VQT0T50