Check Before Recording - Panasonic SDR-S100 Operating Instructions Manual

Sd 3ccd digital camcorder sdr-s100 operating manual
Hide thumbs Also See for SDR-S100:
Table of Contents

Advertisement

Recording

Check before recording

First, format the SD card if one which has been used on another device is going to be used
for the first time on this unit. (P65) When the SD card is formatted, all of the recorded data
(files) is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a
PC or other device before proceeding with the formatting. When copying images recorded
using this unit to a PC, you must use MotionSD STUDIO. (P73)
Depending on the TV connected,
the sides of the images (the part
outside the dotted line) being
played may not appear. We
recommend widening the recording
range of the objects you want to
record beforehand.
116:9 screen
24:3 screen
This unit is compatible with wide-screen TVs (16:9) and set to wide mode at the time of
purchase. To watch images on normal TVs (4:3), change the wide mode setting before
recording (P40) or when playing back the images on the TV screen (P71).
∫ Basic camera holding
≥ Open the LCD monitor.
Recording cannot start when the LCD monitor
is closed. However, even if the LCD monitor is
closed during recording, the power does not
turn off until recording is ended.
≥ The angle of the LCD monitor can be adjusted
to suit what you want to record.
≥ We recommend attaching the hand strap 4
(supplied) to prevent the camera from dropping.
≥ Do not cover the White balance sensor 3 with
your fingers, etc.
≥ Do not cover the lens, the front of the flash 1 or the built-in stereo microphone 2
with your fingers.
1
3:42 PM
3:42 PM
DEC 15 2005
DEC 15 2005
16:9
2
3:42 PM
3:42 PM
DEC 15 2005
DEC 15 2005
4:3
1
2
3
4
31
VQT0T50

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdr s10 - camcorder - 800 kp

Table of Contents