Shooting A Snapshot While Shooting A Movie - Casio EX-ZR5100 User Manual

Shooting a Snapshot while Shooting a Movie

(Snapshot In Movie)
You can shoot snapshots while movie recording is in progress by pressing the shutter
button. When the camera is in the Single Shot mode, you can shoot snapshots one-
by-one. In the CS mode, holding down the shutter button will record up to seven
consecutive images at a speed of approximately 10 images per second (fps). You
can shoot a maximum total of 28 images during a single movie recording operation.
1.
While a movie is being recorded, press the
shutter button.
• Select FHD movie or STD movie as the movie
quality setting (page 123).
• In the CS mode, images continue to be shot as long
as you keep the shutter button depressed.
• While movie recording is in progress, you can toggle
between the Single Shot Mode and the CS mode by
pressing [Õ] (Continuous Shutter), [4] or [6]. Note
that this method for mode switching is possible only
during movie recording. The CS mode is indicated
when is white (on the monitor screen), and the
Single Shot mode is selected when t is white.
NOTE
• Note that the flash cannot be used.
• Note that shooting a snapshot while shooting a movie is supported during FHD
movie and STD movie recording only. It is not supported during other types of
movie recording.
• Auto-focus is not performed if you half press the shutter button to shoot a snapshot
during movie recording. You can restart Continuous AF by pressing [SET].
• The field of view of a snapshot shot while FHD movie recording is in progress will
be wider than the field of view of the FHD movie.
• The image quality automatically changes to "Normal".
• The P (Program Auto) recording mode is used when you shoot a snapshot during
movie recording.
• Snapshot In Movie cannot be used to shoot snapshots while recording with any
one of the movie recording modes below.
Motion Shutter, Time Lapse movie, Art Shot
85
Snapshot
recording mode
Number of recordable
snapshots
Recording Movies