Table of Contents
Advertisement
Back Lamp Operation
Lamp Status
Lit Red
Flashing Red
Off
IMPORTANT!
• A battery that has not been used for a long time and/or ambient temperature can
cause charging to take longer than normal. These conditions may also cause the
back lamp to flash red. If this happens, refer to page 224.
• Make sure that you insert the cable connector into the [USB] port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• Pressing [ON/OFF] (Power) while the USB-AC adaptor is
connected to the camera will turn on the camera with
power being supplied by the battery. Because of this,
charging will stop.
• The USB-AC adaptor will become warm during charging.
This is normal and does not indicate malfunction.
• The shape of the power plug depends on each country or geographic area.
Description
Charging
Abnormal ambient temperature,
USB-AC adaptor problem, or battery
problem (page 224)
Charging complete
23
Back lamp
Quick Start Basics
Advertisement
Table of Contents
