Shooting A Snapshot While Shooting A Movie - Casio EX-ZR62 User Manual

Shooting a Snapshot while Shooting a Movie

(Snapshot In Movie)
You can shoot snapshots while movie recording is in progress. When the camera is in
the Single Shot mode, you can shoot snapshots one-by-one. In the CS mode, holding
down the shutter button will record up to seven consecutive images at a speed of
approximately 10 images per second (fps). You can shoot a maximum total of
28 images during a single movie recording operation.
1.
While a movie is being recorded, press the
shutter button.
• Select FHD movie or STD movie as the movie
quality setting (page 109).
• While movie recording is in progress, you can toggle
between the Single Shot Mode and the CS mode by
pressing [4], [6], or [SET]. Note that this method
for mode switching is possible only during movie
recording. The CS mode is indicated when
white (on the monitor screen), and the Single Shot
mode is selected when t is white.
• In the CS mode, images continue to be shot as long
as you keep the shutter button depressed.
NOTE
• Note that the flash cannot be used when shooting a Snapshot In Movie.
• Note that shooting a snapshot while shooting a movie is supported during FHD
movie and STD movie recording only. It is not supported during other types of
movie recording.
• Snapshots shot with Snapshot In Movie cannot be focused individually. The focus
will be the same as the movie being recorded.
• The field of view of a snapshot shot while FHD movie recording is in progress will
be wider than the field of view of the FHD movie.
• The snapshot image quality automatically changes to "Normal".
• The "Program Auto" recording mode is used when you shoot a snapshot during
movie recording.
• You cannot shoot with Snapshot In Movie while Motion Shutter or Time Lapse
movie recording is in progress.
is
79
Snapshot
recording mode
Number of recordable
snapshots
Recording Movies