Table of Contents
Advertisement
. Creating a Collage of a Day's Snapshots (Highlight Photo)
Highlight Functions * Highlight Photo
Menu item :
You can configure camera settings to automatically select
snapshot highlights and generate a collage of them. The
snapshots included in a Highlight Photo are selected
automatically based on their high light scores and shooting
condition information recorded along with the snapshots.
• You can use the Highlight Score function (page 143) to
change the highlight score of a snapshot.
1.
Use [8] and [2] to select the recording date of the snapshots you
want to use and then press [SET].
2.
Use [4] and [6] to select the layout you want and then press [SET].
This creates and stores the Highlight Photo.
3.
Use [8] and [2] to select "Complete" and then press [SET].
• If you want the camera to randomly select different images from among those
on the selected recording date, use [8] and [2] to select "Shuffle", and then
press [SET]. This will also delete the previously created Highlight Photo.
NOTE
• An image whose highlight score is "0" is never included in a Highlight Photo.
• When there are more than 9,999 snapshots shot on the same date stored on the
memory card, Highlight Photo will select photos from those numbered 1 to 9999.
• The Highlight Photo operation may not be possible while battery power is low.
• Highlight Photo automatically selects snapshots to be included in the Highlight
Photo. You cannot specify the snapshots to be used.
• The types of images below cannot be included in a Highlight Photo.
Panorama image, Movies
• Highlight Photo may not work if there is a snapshot in camera memory that cannot
be displayed by the camera. In this case, the error message "There are not enough
images for this operation." will appear.
Other Playback Functions (PLAY MENU)
142
Advertisement
Table of Contents
