Advertisement
Quick Links
SATINJET
Installation Guide
Technical Specifications:
Operating Temperature:
Hot: Max 60°C / 140°F*
Cold: Min 5°C / 40°F
Suitable for use with high pressure
water supply
SHOWER ARMS
Operating Pressure:
Min: 35kPa/0.35bar
Max: 500kPa/5bar*
AUSTRALIA ONLY
Min: 150kPa/0.5bar
Max: 500kPa/5bar*
WALL SHOWER/ARM
®
Inlet Connections:
All ½" BSP
* Regional specific regulations apply.
Please refer to your warranty statement at
www.methven.com
WALL SHOWERS
Operating Pressure:
Min: 35kPa/0.35bar
Max: 500kPa/5bar*
AUSTRALIA ONLY
Min: 150kPa/0.5bar
Max: 500kPa/5bar*
Operating Pressure:
Min: 150kPa/1.5bar
Max: 500kPa/5bar*
www.methven.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for METHVEN SATINJET WALL SHOWER
Summary of Contents for METHVEN SATINJET WALL SHOWER
- Page 1 Inlet Connections: * Regional specific regulations apply. Please refer to your warranty statement at Hot: Max 60°C / 140°F* All ½" BSP www.methven.com Cold: Min 5°C / 40°F Suitable for use with high pressure water supply SHOWER ARMS WALL SHOWERS...
- Page 2 This product must be installed in compliance with all relevant regional regulations. BSP Nipple/NPT • It is the responsibility of the installer to Methven Shower ensure a watertight seal is achieved. Arm (If Supplied) • Care should be taken when connecting wall shower to shower arm to not damage the flow...
Need help?
Do you have a question about the SATINJET WALL SHOWER and is the answer not in the manual?
Questions and answers