Download Print this page
METHVEN RERE 16-1027 Installation Manual

METHVEN RERE 16-1027 Installation Manual

Exposure rail shower

Advertisement

Quick Links

CLEANING
Water contains lime which remains on the
surface after the water has evaporated. These
lime deposits can be prevented from forming by
wiping immediately after use.
Do not use any
sharp objects to
clean nozzles
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com/au or call Customer Service
97-9301
To clean the chrome-plated surface use a soft
cloth, soap and warm water. Never use cleaning
agents that contain a corrosive acid or a scouring
additive.
Australia
1300 638 483
RERE EXPOSURE RAIL SHOWER
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min:150kPa
Max: 500kPa
Optimum: 150kPa - 500kPa
Operating Temperature:
Hot: Max 80°C
Cold: Min 5°C
* Regional specific regulations apply.
Please refer to your warranty statement at www.methven.com
DEC2012

Advertisement

loading
Need help?

Need help?

Do you have a question about the RERE 16-1027 and is the answer not in the manual?

Questions and answers

Summary of Contents for METHVEN RERE 16-1027

  • Page 1 Please refer to your warranty statement at www.methven.com Methven warrants this product against manufacturing defects and that it is suitable for use under the operating conditions specified in this instruction sheet. For your warranty please refer to www.methven.com/au or call Customer Service...
  • Page 2 Curved Rail Section Showerhead WATER INLET: RECOMMENDED MINIMUM HEIGHT OF 1800mm FROM FLOOR LEVEL Inlet Adapter Inlet Adapter Inlet Adapter Handset Diverter Body ○ 25mm Slider/Handset Holder Soap Dish Wall Bracket Wall Bracket Wall Plug Hose Stainless Steel Bottom Bracket Screw Fixing Boss Install a ½"...