METHVEN FLEXISPRAY Shower Mixer with Diverter Installation Manual

Table of Contents

Download this manual

Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with

contamination free warm soapy water and a damp soft cloth.

Methven warrants this product against manufacturing defects and that it is suitable for use

under the general operating conditions speciﬁed in this instruction sheet. However, regional

regulations apply and may aﬀect your warranty. Please refer to www.methven.com or call

customer service for full details.

New Zealand

Australia

Shower Mixer with Diverter

Technical Speciﬁcations:

Operating Pressure:

Min:

kPa/ . bar

Max:

kPa/ bar*

Operating Temperature:

Hot: Max

Cold: Min

Inlet Connections:

All ½" BSP

USE PARALLEL FITTINGS ONLY

* Regional speciﬁc regulations apply.

Please refer to your warranty statement

at www.methven.com

ISSUE A

Table of Contents

Need help?

Do you have a question about the FLEXISPRAY Shower Mixer with Diverter and is the answer not in the manual?

Page 1 Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with contamination free warm soapy water and a damp soft cloth. Methven warrants this product against manufacturing defects and that it is suitable for use under the general operating conditions speciﬁed in this instruction sheet. However, regional regulations apply and may aﬀect your warranty.
Page 2 IMPORTANT: Before you begin, turn oﬀ the water supply. General: Installation: • Methven recommends this product is installed by a licensed plumber in compliance with Step 1 all relevant regional regulations. • Leave plastic covers in place during the installation.