Advertisement
Care and Cleaning:
Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with
contamination free warm soapy water and a damp soft cloth.
Methven warrants this product against manufacturing defects and that it is suitable for use
under the general operating conditions specified in this instruction sheet. However, regional
regulations apply and may affect your warranty. Please refer to www.methven.com or call
customer service for full details.
New Zealand
0800 804 222
439835
Australia
1300 638 483
Wall Mounted Mixer Square
Installation Guide
Technical Specifications:
Operating Pressure:
Min: 150kPa/1.5bar
Max: 500kPa/5bar*
Optimum: 150kPa/1.5bar - 500kPa/5bar
Operating Temperature:
Hot: Max 80°C*
Cold: Min 5°C
Inlet Connections:
All ½" BSP
USE PARALLEL FITTINGS ONLY
* Regional specific regulations apply.
Please refer to your warranty statement
at www.methven.com
Note: This product allows for the spout to
be positioned on either side of the mixer.
UK
0800 195 1602
ISSUE B
www.methven.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for METHVEN 03-9548
Summary of Contents for METHVEN 03-9548
- Page 1 Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with contamination free warm soapy water and a damp soft cloth. Methven warrants this product against manufacturing defects and that it is suitable for use Note: This product allows for the spout to under the general operating conditions specified in this instruction sheet.
- Page 2 IMPORTANT: Before you begin, turn off the water supply. General: Installation: • Methven recommends this product is installed by a licensed plumber in compliance with Step 1 all relevant regional regulations. • Fit pipework to inlet ports on the shower body before •...
Need help?
Do you have a question about the 03-9548 and is the answer not in the manual?
Questions and answers