Advertisement
Quick Links
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to www.methven.com or call Customer Service
New Zealand
0800 804 222
435013
Australia
UK
1300 638 483
0800 195 1602
KIRI SATINJET ULTRA LOW FLOW
SHOWER HEAD/HANDSET
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min 1 bar, Max 5 bar.
If supply exceeds 5 bar a pressure
limiting valve must be installed.
Operating Temperature:
Max 70°C.
Notes:
●
After installation all connections
must be checked for leaks.
●
All installations must be carried
out in compliance with relevant
water regulations.
Issue A
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for METHVEN KIRI SATINJET ULTRA LOW FLOW
Summary of Contents for METHVEN KIRI SATINJET ULTRA LOW FLOW
- Page 1 Methven warrants this product against manufacturing defects and that it is suitable for use under the operating conditions specified in this instruction sheet. For your warranty please refer to www.methven.com or call Customer Service...
- Page 2 ULTRA LOW FLOW HANDSET INSTALLATION ULTRA LOW FLOW SHOWER HEAD CLEANING INSTALLATION Water contains lime which remains on the surface To clean the chrome-plated surfaces use a soft after the water has evaporated. These lime cloth, soap and warm water. Never use cleaning deposits can be prevented from forming by wiping agents that contain a corrosive acid or a scouring immediately after use.
Need help?
Do you have a question about the KIRI SATINJET ULTRA LOW FLOW and is the answer not in the manual?
Questions and answers