Table of Contents
Advertisement
EN
1.3. General safety instructions
DANGER
Insufficient qualification
Inappropriate handling due to insufficient qualification can lead to serious property damage and
personal injuries or death.
•
•
DANGER
Escaping compressed gas
Risk of serious or even fatal injury from suddenly released compressed gas, condensate or
unsecured system components.
•
•
•
•
•
•
DANGER
Mains voltage
Risk of electric shock with serious or even fatal injuries if contact is made with non-insulated, live
components.
•
•
•
WARNING
Operation outside of limit values
If the specified limit values are undershot and/or exceeded, there is a risk of device malfunction,
potentially resulting in injury and/or damage to property.
•
•
Skilled technical personnel
1
Skilled technical personnel are people who, due to their professional qualification and knowledge in the field of measuring,
control and pneumatic technology, and their knowledge of the applicable statutory regulations, guidelines and standards are in a
position to independently foresee potential dangers in relation to the use of the device and who are qualified to perform the tasks
described in this manual. Special assembly conditions e.g. aggressive media require additional knowledge. It is the responsibility of
the device/plant owner to ensure that the instructions in this manual are adhered to.
BEKOMAT
8/9
®
All the tasks described in this installation and operation manual may only be carried out by skilled
technical personnel¹ with the qualifications described below.
The skilled technical personnel¹ must have read and understood the contents of the installation and
operation manual before carrying out any tasks.
Before carrying out any assembly, installation or maintenance work, depressurise the system. They
may only be carried out by authorised skilled technical personnel
Use only pressure-resistant installation materials and suitable tools that are in proper working order.
Before pressure build-up, check all unit parts and repair them, if necessary. Open valves slowly to
prevent pressure blow outs in operating state.
Always prevent people or objects from being affected by condensate or escaping compressed gas.
Prevent vibrations, oscillations and impact from being transferred to system parts.
Carry out a leakage test.
Observe all applicable regulations with respect to electrical installations (e.g. VDE 0100 / IEC 60364).
Only execute installation and maintenance work when the system has been de-energised.
Electrical work may only be carried out by authorised skilled technical personnel
The device must only be operated for the intended purpose and within the permissible limits
specified on the type plate and in the technical data.
Strictly adhere to the prescribed operating times and maintenance intervals.
Installation and operation manual
.
1
.
1
5
Advertisement
Table of Contents
