CDA 3B10 Installation, Use And Maintenance Manual page 3

Table of Contents

Advertisement

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy
and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin
Please note:
Under no circumstances should the extractor be
connected to any gas ventilation system, flue system or
hot air ducting system.
Do not vent the extractor into an attic or loft space.
Only install the extractor in rooms with adequate
ventilation. Remember that the extractor is powerful and
whatever air is extracted needs to be replaced.
Do not tile the extractor in. It should be removable for
service or maintenance.
Do not use silicone sealant to secure the extractor to the
wall.
You must be able to isolate the extractor from the mains
electrical supply after installation.
.
3

Advertisement

Table of Contents
loading

Table of Contents