Table of Contents
Related Manuals for CDA 3B10
Summary of Contents for CDA 3B10
- Page 1 3B10 Extractor Installation, Use and Maintenance Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu W : www.cda.eu www.cda.eu...
- Page 2 Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes. Appliance Model...
- Page 3 IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer providing appliance recycling services. Disposing of a household appliance separately avoids possible negative consequences for the environment and health.
-
Page 4: Using Your Extractor
• Steam cleaners must not be used when cleaning this appliance. • The performance of your extractor will vary depending on a number of factors, such as supply voltage and cleanliness of the filters. Note: For best performance, you should switch on the extractor 15 minutes before starting to cook and leave it to run for approximately 15 minutes after the end of cooking. - Page 5 To switch the extractor on: • Touch the “Plus” key (D) to start the extractor running at the lowest speed. Setting the extractor speed when it is running: The extractor may run at a choice of 4 speeds, indicated by the “Speed indicator”...
-
Page 6: Care And Maintenance
You can clean your extractor effectively by simply using a dilute solution of water and mild detergent and drying to a shine with a clean cloth, for example the CDA E-Cloth. Cleaning the grease filter The grease filter should be kept clean to minimise the risk of fire. - Page 7 2. Check that the fuse in the spur has not blown. The LED Lamps The LED lamp strips are long-life items that are not designed to be replaced by the user. In the unlikely event of a lamp failure, contact CDA Customer Care for assistance.
-
Page 8: Mains Electricity Connection
Mains Electricity Connection THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWITCHED FUSED SPUR OUTLET AND PROTECTED BY A 3A FUSE. We recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. -
Page 9: Electrical Information
Note: Use a 3A Fuse. Assembly and electrical connection should be carried out by specialised personnel. When installing this product we recommend you seek the help of another individual. Do not mount the isolation switch behind the chimney section. It is a requirement that you must be able to isolate the extractor from the mains electrical supply after installation. -
Page 10: Installation
Installation When the extractor is to be installed above an electric hob, the minimum distance between the hob and extractor Gas: 650mm minimum must exceed 650mm. Electric: 650mm minimum When the extractor is to be installed above a gas hob, the minimum distance Fig. - Page 11 Mounting Your Extractor To mount the hood onto a wall: 1. Use the template supplied to mark out five fixing holes in the wall, then drill these using a suitable drill for the type of wall: Fig. 4 • Three holes for the top hanging bracket.
- Page 12 5. Insert the two lower fixings through the mounting holes in the extractor body and into the wall to lock the appliance in position. The location of the holes is shown in fig. 5. Fig. 5 For recirculating installation: When installing for recirculation only the lower chimney section is used.
- Page 13 For extracting installation: When installing for extraction both of the chimney sections are used. 1. Screw the top mounting bracket (“A” in Fig. 7) to the wall and/or ceiling, centrally above the extractor outlet. 2. Fit your choice of ducting to the Fig.
- Page 14 Notes:...
- Page 15 Measured power consumption off mode Sound power level Grease Filter Efficiency 79.7 (C) Hood Lamp efficiency 23.6 (B) Hood E & O E. All instructions, dimensions and illustrations are provided for guidance only. CDA reserve the right to change specifications without prior notice.
- Page 16 T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu W : www.cda.eu www.cda.eu Copyright © CDA 2015...