Anchoring - GEA Grasso VHS Series Installation And Maintenance Instructions Manual

INSTALLATION AND PREPARATION FOR USE
INSTALLATION
Fig.5
It is recommended to consult a concrete specialist/ constructor for the following
items:
•
•
•

1.3.5.2 Anchoring

After the concrete block has cured the anchors should be installed as shown
above and in case of a package in accordance with the package lay out drawing.
Templates should be made to locate the anchor bolts or chemical anchors to
match the holes in the bottom flange of the base frame.
Grout the mortar according to the supplier instructions. Install chemical anchors
as illustrated in Figure 6, Page 19 and according to the instructions of the
anchor supplier.
18
A
B
The compound of the concrete with/without reinforcement.
The exact grouting depth (dependent on the soil conditions).
Installing foundation onto an existing floor, with sealing corkboard or vibration
isolators.
Chemical anchor
Grouted anchor, grounded to reinforcing steel
P-NL-094_imm_VHS_English_13
26.07.2021