Required Free Space; Foundation Requirements - GEA Grasso VHS Series Installation And Maintenance Instructions Manual

INSTALLATION AND PREPARATION FOR USE
INSTALLATION
Fig.3:
Moving by fork-lift truck
The bare compressor or package can be transported with a fork-lift truck with the
forks spread as much as possible between the skids. To simplify moving, the 2
wooden transport beams must still be mounted underneath the base frame and
stored in this way, until the package is positioned above its approximate location.
1.3.4

Required free space

For easy operating, servicing and maintenance access, the compressor
(package) should be installed with sufficient free space around it.
1.3.5

Foundation requirements

This paragraph covers measures to be taken for a compressor (package)
mounting on a concrete block.
Two foundation arrangements are described:
16
Hoisting angle
Hint!
Refer to "Product Information" for minimum requirements.
Hint!
Compressor (package) has to be mounted on a concreted block. On
request, Grasso can calculate the exact dimensions of the concrete
block, based on the compressor size and operating conditions.
P-NL-094_imm_VHS_English_13
26.07.2021