Using The App - TypeS Formula DRIFT PSL PRO Series Installation Manual & Safety Information

Home Page
Tap "PRO SERIES" icon to start. The
APP will automatically pair to the Smart
Hub when both the lights and your
device are powered on and within the
30-foot Bluetooth® range. We strongly
recommend that you setup a private
password to prevent unauthorized
devices from connecting to the Smart
Hub. (Refer to password instructions
on page 15)
NOTE: The Smart Hub has built-in
voltage protection to prevent car battery
from draining in case the lights are
accidentally left on. The lights will be
turned off automatically and the Smart
Hub will be on standby mode when
the voltage drops to approximately
12V. Once on standby mode, if the car
battery is producing below 12V, do not
turn on the LED lights until your next
engine start or when power is back to
12V or above.

USING THE APP

Pro Series Page
Master On/Off
A
Switch
LED Zone
B
Functions
C
Save Preset
D
Password
E
LED Modes
Brightness
F
G Speed
9